Trotec Speedy 100 flexx kombinovaný CO2 a vláknový laser

Laserová gravírka s pohyblivou hlavou s možností integrace CO2 trubice i vláknového laseru

Our experts
are ready to help

Maximální flexibilita.

Speedy 100X je unikátní laserová gravírka s pohyblivou hlavou. Kompaktní laser zajišťuje maxximální flexxibilitu při používání. Jeden laserový systém, dva laserové zdroje, nekonečné množství aplikací. Značit a gravírovat lze prakticky cokoliv: od plastu nebo dřeva až po sklo nebo kov.

Nekonečno možností.

Flexibilita. Univerzálnost. Rychlost.  Jako poskytovatelé služeb v oboru gravírování a popisování budete schopni dodávat větší množství ve skvělé kvalitě a zajistit si tak věrnost vašich zákazníků. Se strojem série Speedy flexx můžete zpracovat nekonečné množství materiálů a splnit prakticky jakoukoli objednávku.

Laserová gravírka s pohyblivou hlavou s možností integrace CO2 trubice i vláknového laseru. Navíc je možné druhý laserový zdroj nainstalovat do laseru až dodatečně, čímž je Speedy 100X nejvíce flexxibilním řešením v oblasti laserů. S tímto laserem lze výrazně ušetřit čas, jelikož dva materiály mohou být zpracovány v jediné úloze.
Speedy 100X je určen malým a středním firmám, které se rozhodnou pro moderní technologii. Umožní jim rozšířit možnosti výroby třeba o razítkové štočky z gumy, laserový popis reklamních předmětů či výrobu orientačních systémů, laserové řezání plastů, výrobu štítků pro průmysl, ale i popis a gravírování plastů a kovových materiálů pomocí vláknového laseru.

Basic set-up

Improves the laser engraving on many materials while also protecting the optics of the laser engraving machine.
Find more
Atmos exhaust systems filter particles and odors. They set new standards in terms of comfort during handling, efficiency, and running costs.
Find more
Light barriers for optimal adjustment of working height and focusing.
Find more
Sends feedback messages from the laser to the computer. This allows you to control essential functions directly from the computer.
Find more
The resonator body where the laser radiation is generated is made of 100% ceramic. CeramiCore® stands for reliability, high engraving quality and longevity.
Find more
The working table is ferro-magnetic over the entire surface. This means that you can simply use magnets to hold thin materials, such as paper, foils or films, in place.
Find more
With the flexx-function CO2 and fiber laser can alternately be activated in only one laser machine with a click of the mouse.
Find more
Při dělení materiálů lze volitelně použít řezací stůl Honeycomb. Použitím řezacího stolu se omezují zpětné odrazy od pracovního stolu, které mohou způsobit poškození spodní části řezaného materiálu.
Find more
Ensures higher productivity and lower running costs thanks to minimum maintenance and optimal protection against dust.
Find more
Intelligent cutting with Trotec IPC With the novel laser control module, speed and acceleration are dynamically adapted depending on the cutting path. The process time and the quality of the cutting results are significantly improved.
Find more
Innovative laser software that offers maximum operator comfort for preparing your laser jobs. Laser engraving and laser cutting will be as easy as child's play.
Find more
The laser pointer indicates exactly by a red dot where the beam of the laser machine will hit the material.
Find more
OptiMotionTM - record cutting speed Using OptiMotion™ technology, cutting speed and acceleration are calculated based on real-time geometry. This is standard for larger cutting systems, but for medium-sized lasers it is a real innovation. Perfect curve quality and up to five times faster cutting speed.
Find more
Trotec Ruby is a new software platform and provides a new user interface. Use the integrated workflow to create graphics, photos, and text elements and make quick edits. You can switch between the "design" and "preparation" steps at any time in a single software that is both a graphics and a laser program. Ruby software allows you to directly import files from PDF, SVG, and PNG files. …
Find more
With the Software Autofocus, the laser beam is focused for laser engraving, laser marking and laser cutting with just one press of the button.
Find more
The trolley table converts your Speedy into a standing unit. Also available with storage shelf for essential materials.
Find more

Optional accessories

Continuous improvement has led to the development of the latest system in the Atmos portfolio. The Atmos Cube replaces the Atmos Compact. The Atmos Cube extraction system forms a single unit with the laser engraving and thus saves great space. It can be placed directly under the laser and is thus also a supporting element. Filters dust particles and odors. FlowControl - air flow control …
Find more
Trotec Atmos Mono exhaust system is designed to Trotec lasers for the production of rubber stamps. Electronics allows to control the device using a laser engraving machine from software A.D. Logic. Exhaust activity is monitored by software and operator is informed on time about eg. a state of filters and automatically prompts you to change them. The two-stage cleaning system - a compact dust …
Find more
Univerzální samostředící sklíčidlo, které je upraveno pro namontování na standardní rotátor Trotec. Sklíčídlo umožňuje nejen přímo upínat předměty, ale i nejrůznější adaptéry, držáky, apod.
Find more
Get the perfect cutting result in a few easy steps JobControl® Cut is a fully integrated editor for processing and optimizing basic cut geometries in the Troctec JobControl® laser software - without having to change the original geometry again in the graphics software. Get the perfect cutting result in a few easy steps. JobControl® Cut requires only a short amount of training and is …
Find more
Find the right lens for achieving optimal results during laser engraving or laser cutting with Trotec laser machines.
Find more
Mechanický předfiltr k laseru je vhodný zejména pro výrobce razítkových štočků. Pasivní zařízení s vysokým stupněm filtrace se zapojí mezi laser a odsávač a jeho úkolem je zachytit co největší množství prachu a prodloužit tak životnost hlavního mechanického filtru v odsávači.
Find more
Prefilters: Pre-separators for high-dust laser engraving and cutting applications Trotec offers an exhaust system specially designed for engraving or cutting of materials that produce a great amount of dust, such as e. g. wood or stamp rubber. In addition to the exhaust system, we recommend the use of a pre-filter, a so-called pre-separator. This exhaust system has been designed …
Find more
Is required for laser engraving round, cylindrical and conical objects, such as glasses or bottles. Simply insert it in the engraving compartment and attach.
Find more
Trotec Ruby is a new software platform and provides a new user interface. Use the integrated workflow to create graphics, photos, and text elements and make quick edits. You can switch between the "design" and "preparation" steps at any time in a single software that is both a graphics and a laser program. Ruby software allows you to directly import files from PDF, SVG, and PNG files. …
Find more
Monitors the temperature in the engraving compartment and thus reduces the flame risk during laser cutting.
Find more
Postscript Converter: Converts postscript formats (EPS, PS, PDF, BMP, JPEG, TIFF) to files that can be processed by laser.
Find more
The Trotec Vent series has been designed as a simple extraction system for specific configurations of laser machines. They guarantee optimal suction performance. The average acoustic noise level is 88 dB. If the fans are operated in workshops, it is recommended to use cabins with noise reduction. Noise reduction is approximately 12 db. The fan can also be used to extract fumes during …
Find more