The mechanical pre-filter for the laser is especially suitable for manufacturers of stamping plates. A passive device with a high degree of filtration is connected between the laser and the extractor and its task is to capture as much dust as possible and thus extend the life of the main mechanical filter in the extractor. Easy cleaning of filter cartridges using a mechanical knocker. Dust is collected in the ashtray, which is easily accessible by opening the side door. A hose with a diameter of 800 or 400 mm can be connected. Important notice: we do not recommend using the standard mechanical pre-filter when engraving and cutting wood, which produces sticky dust. For this purpose we recommend version VA5-2 add.
Mechanical pre-filter EKO
The mechanical pre-filter for the laser is especially suitable for manufacturers of stamping plates. A passive device with a high degree of filtration is connected between the laser and the extractor and its task is to capture as much dust as possible and thus extend the life of the main mechanical filter in the extractor.
Technical parameters
- external dimensions: 480 x 630 x 1250 mm
- weight 55 kg
- for connection hoses with a diameter of 40 and 80 mm
