The Trotec Vent series has been designed as a simple extraction system for specific configurations of laser machines. They guarantee optimal suction performance.
The average acoustic noise level is 88 dB. If the fans are operated in workshops, it is recommended to use cabins with noise reduction. Noise reduction is approximately 12 db.
The fan can also be used to extract fumes during cutting. Its use is suitable in the case of processing materials whose fumes do not contain dust and the odor cannot be removed by activated carbon (wood, paper).
| Vent Set | Vent Set | Vent Set | Vent Set | Vent Set | |
| 300 | 400 | 500 | 1500 | SP3000 | |
| Number of fans | 1 | 1 | 1 | 1 | 2 |
| Circuit switch including Sub D-9 interface for remote control via JobControl | ● | ● | – | – | – |
| Frequency converter for infinitely variable speed incl. SUB-D9 interface for remote control via JobControl | – | – | ● | ● | ● |
| Diameter of the adapter on the fan | 80 mm Ø | 100 mm Ø | 100 mm Ø | 200 mm Ø | 80 mm Ø |
| 200 mm Ø | |||||
| Required security | 16A | 16A | 16A | 16A | 16A |
| 3 meter exhaust pipe from laser to vent incl. all necessary hoses, hose clamps, adapters | ● | ● | ● | ● | ● |
| Noise reduction pipes for pipes from laser to Vent | – | ● | ● | ● | ● |
| Mounting kit for mounting the fan on the floor incl. vibration dampers | ● | ● | ● | ● | ● |
| Exhaust pipe from Vent to atmosphere (outside) | – | – | – | – | – |
| Noise reduction cab | – | – | optionally | optionally | optionally |
| Wall bracket for mounting the fan on the wall | optionally | optionally | optionally | optionally | optionally |
| Vent Set | Vent Set | Vent Set | Vent Set | Vent Set | ||
| 300 | 400 | 500 | 1500 | SP3000 | ||
| Rayjet 50 | All types of tables | ● | – | – | – | – |
| Speedy 100 | All types of tables | ● | – | – | – | – |
| Speedy 300 | Feromagnetic table | ● | ● | ● | – | – |
| Vacuum table | – | ● | ● | – | – | |
| Speedy 360 | Feromagnetic table | – | ● | ● | – | – |
| Cutting grid | – | ● | ● | – | – | |
| Cutting lamellas | – | ● | ● | – | – | |
| Vacuum table | – | – | ● | – | – | |
| Speedy 400 | Feromagnetic table | – | ● | ● | – | – |
| Cutting grid | – | – | ● | – | – | |
| Cutting lamellas | – | – | ● | – | – | |
| Vacuum table | – | – | ● | – | – | |
| SP500 | Cutting grid | – | ● | ● | – | – |
| Cutting lamellas | – | ● | ● | – | – | |
| Vacuum table | – | – | ● | – | – | |
| SP1500 | All types of tables | – | – | – | ● | – |
| SP2000 | All types of tables | – | – | – | – | ● |
| SP3000 | All types of tables | – | – | – | – | ● |
